Receiving inspection that holds up in an ISO 9001, AS9100 or IATF 16949 audit
Choose your industry profile and SkipLot QC applies the controls your standard and customers expect: how lots are sampled, who can authorize a concession, what must happen before release.
Control of externally provided products
The baseline for every workspace: evaluate suppliers, verify what they ship to a defined plan, release it deliberately and handle nonconformities with authorization and records.
| Clause | How SkipLot QC supports it |
|---|---|
| 8.4.1 | Supplier evaluation and re-evaluation. An approved supplier list with qualified, conditional, not-qualified and suspended statuses, certificate expiry and re-verification dates. Receiving and QC see a caution for suppliers that aren't qualified. |
| 8.4.2 | Type and extent of control. Sampling plans and skip-lot rules per category of part, with the inspection level and AQLs recorded on every lot. |
| 8.5.2 | Identification and traceability. Each lot is tied to its PO line, supplier, part revision and your own batch or pallet ID. |
| 8.6 | Release. Accepted lots are released to production from a release queue that records who released them and when, and blocks lots that still need something. |
| 8.7 | Nonconforming outputs. Reject, rework, scrap or use-as-is; use-as-is requires MRB authorization, and reworked lots need a recorded completion. |
| 9.1.3 | Performance of external providers. Supplier scorecards: lot acceptance, PPM, on-time delivery and open corrective actions. |
| 10.2 | Corrective action. SCAR / 8D with an owner, root cause and verification of effectiveness confirmed step by step. |
| 7.5 | Documented information. Append-only audit trail and exports of every list and record. |
Aerospace
The aerospace profile adds first article inspection, key characteristics, zero-acceptance sampling, supplier document review and counterfeit-part prevention on top of ISO 9001. Professional
| Requirement | How SkipLot QC supports it |
|---|---|
| 8.4.1 | Supplier register with approval status and scope. Conditional approval with recorded conditions; suspending a supplier interrupts its skip-lot parts. |
| 8.4.2 · AS9138 | Verification by sampling. Zero-acceptance (c = 0) plans, with the statistical rationale recorded for each category. |
| 8.4.2 | Test reports and certificates. Certificates of conformance and test reports are reviewed and accepted before a lot can be released. |
| AS9102 | First article inspection on new parts, on every revision change, and after two years without production. Each revision keeps its own first-article record. |
| 8.1.2 · AS9103 | Key characteristics are marked on the part and keep it off skip-lot, so every lot is inspected for them. |
| 8.1.4 | Counterfeit parts. Electronic parts from brokers or independent distributors are always inspected and can be quarantined as suspect. |
| 8.7.1 | Use-as-is and repair require design-authority authorization. |
Automotive
The automotive profile adds PPAP approval per revision, zero-defect sampling, customer-authorized concessions with limits, and the supplier performance indicators IATF 16949 lists. Professional
| Requirement | How SkipLot QC supports it |
|---|---|
| PPAP | Production part approval per revision. Lots are inspected until the revision they belong to has an approved PPAP. A new revision starts its own PPAP; approval never carries over from the old one. |
| 8.6.6 | Zero defects for attribute sampling (c = 0) applied to every plan. |
| 8.7.1.1 | Customer concessions for use-as-is and rework, recorded with an expiry date or authorized quantity. |
| 8.4.2.4 | Supplier monitoring: delivered quality (PPM), customer disruptions including yard holds and stop ships, delivery performance and premium freight. |
| 10.2.3 | Problem solving. 8D corrective actions with containment and root-cause due dates and an owner who confirms each step. |
The sampling standards underneath
Every workspace can use recognized sampling instead of rules of thumb. Choose per category of part.
ISO 2859-1: sampling by attributes
Lot size and inspection level give a code letter; the AQL gives the sample size and accept/reject numbers. Switching rules move a supplier to tightened inspection after two of five lots are rejected, and back when performance recovers.
ISO 2859-3: skip-lot procedures
Once the supplier and the part qualify, lots are selected for inspection at random at a set frequency. A rejected lot, a process or design change, or a gap in production interrupts skip-lot until the part requalifies.
SkipLot QC helps you meet these requirements; it doesn't certify your quality system. Your quality manual, your customers' requirements and your certification body decide how they apply to you.
Choose your industry in the guided setup
General manufacturing is in every plan; aerospace and automotive are part of Professional. The free trial includes all three.