Skip to content
Incoming inspection · Supplier quality

Inspect what matters. Skip what's earned trust.

SkipLot QC decides, lot by lot, which shipments to inspect and which to release, using ISO 2859 sampling and skip-lot rules your auditors already know. Built for manufacturers working to ISO 9001, AS9100 and IATF 16949.

30-day free trialNo credit cardGuided setup
Built on the standards your auditors use
ISO 2859-1ISO 2859-3ISO 9001:2015AS9100DAS9102AS9138IATF 16949AIAG PPAP
How it works

From the PO report to an inspection decision in minutes

No new ERP, no spreadsheets of skip counts. Bring in what you already have and every line gets a decision with a reason.

Bring in your open POs

Upload an Excel or CSV export from any ERP. The app matches the columns, remembers the format, and updates lines when dates or quantities change.

SAPNetSuiteDynamicsEpicorExcel

Every lot gets a decision

Skip or inspect, with the sample size, before the truck arrives. Receivers scan the PO or pallet at the dock and see the same answer.

Inspect · 80 pcsSkip

Inspect, disposition, release

QC works one queue: record characteristics, pass or fail, route rejects through MRB, raise a SCAR, and release accepted lots to production.

PassedRejected → SCAR
Inspection planning

Know what to inspect before it ships

See every upcoming PO line with its decision, sample size and reason. Assign lines to your QC team or an outside inspection company, and export the list for suppliers.

  • Reasons, not guesses: skip-lot draw, open SCAR, PPAP or revision status, supplier qualification.
  • Unassigned first: lines drop off the list as they're sent to QC or an inspector.
  • Third-party inspectors: assign lines, set due dates, record their results.
Planning features
ISO 2859-1 sampling

Sample sizes from the tables, not from memory

Lot size, inspection level and AQL give the code letter, sample size and accept/reject numbers for every lot. Switching between normal, tightened and reduced happens on its own.

  • Separate AQLs for major and minor characteristics; critical ones are never skipped.
  • Zero-acceptance (c = 0) plans for automotive and aerospace, as IATF 16949 and AS9138 expect.
  • Documented rationale stored with each category for your auditor.
ISO 2859-3 skip-lot Professional

Skip-lot that's earned, and taken away when it should be

Parts qualify through accepted lots from a qualified supplier, then lots are picked for inspection at random. Anything that changes the risk puts the part back on inspection automatically.

  • Random selection at 1 in 2, 3, 4 or 5, recorded so it can't be re-rolled.
  • Automatic interruption on a rejected lot, an open SCAR, a revision change or a production gap.
  • Or keep it simple: a plain "inspect a few, skip a few" cycle, included in every plan.

How our skip-lot inspection software works →

See how much inspection you can safely skip

Import one open-PO report and every line gets its decision. Free for 30 days, no credit card.

Supplier quality

Suppliers, scorecards and 8Ds in the same place as the lots

Qualify suppliers, see how they perform, and run corrective actions with an owner and due dates. A failed lot becomes a SCAR in two clicks, with the evidence attached.

  • Approved supplier list: qualified, conditional or suspended, with certificate expiry. Receiving sees a caution for anyone who isn't.
  • Scorecards: lot acceptance, PPM, on-time delivery, disruptions and premium freight. Professional
  • SCAR / 8D: an owner confirms each D step; containment and root cause have their own due dates.
Supplier quality features
Alerts in Teams and Slack Professional

The right people hear about it the moment it happens

Send alerts to Microsoft Teams or Slack channels when a lot needs inspection, fails, or is released, so QC doesn't have to watch a queue and purchasing hears about rejects right away.

  • Teams or Slack, or both: each alert type goes to the channel you choose, set up in about five minutes with step-by-step instructions.
  • Your wording: write the title and message with placeholders like {part}, {supplier} and {defects}, and pick which details appear.
  • Only what matters: filter by supplier, category or part, so failures on critical parts go to engineering and the rest to receiving.
  • One click to the lot: every alert links straight to the record in SkipLot QC.
Industry profiles

Designed for ISO 9001, AS9100 and IATF 16949

Choose your industry in the guided setup. The app turns on the controls your customers and certification body expect, so receiving inspection holds up in an audit.

ISO 9001:2015

General manufacturing

Control of externally provided products, release and nonconforming outputs.

  • Supplier evaluation and an approved supplier list (8.4)
  • Documented release of accepted lots (8.6)
  • MRB authorization for use-as-is (8.7)
  • Append-only audit trail of every decision
ISO 9001 details
AS9100D · AS9102 · AS9138

Aerospace Professional

First articles, key characteristics and counterfeit prevention.

  • First article inspection on new parts and revision changes
  • Key characteristics never skipped; c = 0 sampling
  • CoC and test-report review before release
  • Counterfeit-risk quarantine for brokered EEE parts
AS9100 details
IATF 16949 · AIAG PPAP

Automotive Professional

PPAP, zero-defect sampling and supplier performance.

  • PPAP approval per revision; lots inspected until approved
  • Zero-acceptance (c = 0) sampling plans
  • Customer concessions with expiry or quantity
  • Supplier scorecards and 8D corrective actions
IATF 16949 details
Fits how you receive

At your dock, or at your supplier's

In-house receiving

Scan and go at the dock

Receivers scan a PO, pallet or lot barcode and get the decision and sample size immediately. Lots that need inspection land in the QC queue; accepted lots wait for release to production.

  • Receive by PO, pallet ID, LPN or your own batch IDs
  • Manual entry for shipments that aren't on a report
Contract manufacturing

Inspect before it ships

Plan inspections on open PO lines, send them to your field inspectors or an inspection company, and enter their results when the reports come back.

  • Assign inspectors with due dates and instructions
  • Track what's out for inspection and what's overdue
Works with your ERP

Use the exports you already have

Drop in an Excel or CSV report from your ERP. The app finds the header row, suggests the columns, and remembers the format next time. Re-imports update lines instead of duplicating them.

  • Your IDs or ours: use your batch, lot or pallet IDs, or let the app build one from PO and line.
  • You decide what updates: new ship dates replace old ones; received lots stay untouched.
  • Preview and undo: see every change before it's saved, and undo an import.
Pricing

Plans for every size of quality team

Start with a 30-day free trial, then choose the plan that fits how you receive and inspect.

Free trial

$0

Try every feature on real shipments for 30 days.

  • 30 days, up to 1,000 lots
  • Every Professional feature
  • 1 user
  • No credit card
Start free trial

Standard

$59 / month

For a receiving and QC team under ISO 9001.

  • Unlimited lots, 3 users
  • Receiving, Inspection Plan, QC queue, release
  • ISO 2859-1 sampling and the simple skip cycle
  • Supplier qualification and SCAR / 8D
  • ERP imports, exports, audit trail
Start free trial

Enterprise

Custom

For more than 10 users, several sites or features built around your process.

  • Everything in Professional
  • More than 10 users
  • A workspace for each site
  • Customized features
Request a quote

Compare plans

Questions

Common questions

Is skipping inspection allowed under my standard?

Yes, when it's done to a documented, statistically valid plan. SkipLot QC uses ISO 2859-3 skip-lot procedures (or a simpler cycle you define), requires a qualified supplier, records every random draw, and puts parts back on inspection when the risk changes. The rules and reasons are kept with each lot for your auditor.

Do we have to change our ERP?

No. Export your open POs or expected shipments to Excel or CSV and upload them. The app recognises common layouts (SAP, NetSuite, Dynamics, Epicor and plain spreadsheets) and remembers your format. You can also log shipments by hand.

What happens when a lot fails?

The part goes back to full inspection, the lot is routed to disposition (reject, rework, repair, scrap or use-as-is with the authorization your industry needs), and you can raise a SCAR with the lot details already filled in.

Can our inspection company or field inspectors use it?

Yes. Assign PO lines to an inspection company or inspector with due dates and instructions, then enter their results when the report comes back. Lines they hold show as "With inspectors" on the plan.

Can it notify us in Teams or Slack?

Yes. Send alerts to Microsoft Teams or Slack channels when a lot needs inspection, fails or is released. You choose the channel, the wording and which details appear, and can filter by supplier, category or part. Alerts are part of Professional, and included in the free trial.

What does the free trial include?

Every feature and industry profile for 30 days, up to 1,000 lots, with one user and no credit card. Choose Standard or Professional to keep going and add your team.

How long does setup take?

A guided setup asks how you receive and inspect, then turns on only the parts of the app you need. Import your suppliers, parts and open POs, and receiving can start scanning the same day.

Get started

Stop inspecting lots that have earned your trust

Create a workspace, import one PO report, and see every line's decision today.

30-day free trialNo credit card